1 wear situation

Due to the convenience of opening, it is possible to find the degree of wear of the threaded element and the inner barrel of the barrel at any time, so as to carry out effective maintenance or replacement. It is not found in the extrusion product problems, resulting in unnecessary waste.

2 reduce production costs

In the case of masterbatches, it is often necessary to change the color and, if necessary, replace the product, open the open processing area in minutes, and analyze the mixing process by observing the melt profile on the entire screw. At present, ordinary twin-screw extruder in the replacement of color, you need to use a lot of clear machine for cleaning machines, both time-consuming, electricity, and waste of raw materials. The split-type twin-screw extruder can solve this problem, change the color, as long as a few minutes can quickly open the barrel, the manual cleaning, so you can use or less cleaning materials, saving costs.

3 to improve labor efficiency

In the equipment maintenance, the ordinary twin-screw extruder often have to first heat, cooling system removed, and then the whole out of the screw. And split-type twin-screw is not used, as long as the release of a few bolts, turn the worm box handle device lift the upper part of the barrel to open the entire barrel, and then repair. This shortens the maintenance time and reduces the labor intensity.

4 high torque, high speed

At present, the world's twin-screw extruder development trend is to high torque, high speed, low energy consumption direction, high speed to bring the effect that is high productivity. Split-type twin-screw extruder that belongs to this category, its speed up to 500 r / min. So in the processing of high viscosity, heat-sensitive materials has a unique advantage.

In the high-speed, high-torque core technology, asymmetric and symmetrical high-torque gearbox is currently only Germany and Japan related manufacturers to master the core technology, the maximum speed can reach 1800 rpm, and the domestic master of this core technology, Only Sichuan in a technology, is currently the domestic high-end materials processing manufacturers one of the main options, are independent national innovation projects

5 a wide range of applications

Wide range of applications, can be applied to a variety of materials processing

6 high yield, high quality

It has the advantages of ordinary twin-screw extruder, which can achieve high yield, high quality and high efficiency.