Zhoushan Yingke Plastic Machinery Co., Ltd. developed with the conical twin-screw extruder mixing performance, back pressure bearing capacity of up to 30Mpa or more, good plasticizing properties, good dispersion and so on. Than the other with the output of the extruder power 30% -50%. The equipment performance reached the international advanced level.

At present, the domestic aluminum-plastic plate extrusion equipment is almost all of the single screw extruder, due to single screw extruder screw structure reasons, so there is energy consumption, low yield, easy to wear screw barrel defects.The main products of the company - "with the cone to the cone-shaped aluminum-plastic plate extruder" (75/85/95 type) with: high yield, energy saving, high filling and other obvious advantages.

The same cone-shaped twin-screw extruder, combined with a cone-shaped twin-screw extruder to eat large and stable, large extrusion force, back pressure bearing capacity, good dispersion, low energy consumption and parallel with the double Screw extruder long diameter, good mixing performance advantages, so with high yield, low energy consumption, mixing and dispersing performance, good plasticizing performance, high filling ratio, can be processed to recover broken materials,...

Due to the convenience of opening, it is possible to find the degree of wear of the threaded element and the inner barrel of the barrel at any time, so as to carry out effective maintenance or replacement. It is not found in the extrusion product problems, resulting in unnecessary waste. In the case of masterbatches, it is often necessary to change the color and, if necessary, replace the product, open the open processing area in minutes, and analyze the mixing process by...

Extrusion has the following characteristics: the production process is continuous, and its products are continuous; high production efficiency; wide range of applications, can produce pipe, bar, profiles, sheet, film, monofilament, wire and cable, and hollow Products, etc .; less investment, quick results.

Single screw extruder As the screw and machine design is simple, easy to manufacture, low prices, so in the plastic processing industry has been widely used. But with the development of the plastics industry, in the processing of new materials and their blends, and rigid PVC powder, single screw extruder showed a lot of limitations, mainly in the following areas:

Today's rapid economic development, the application of various types of mechanical tools for people's production and life has brought no small help. Not only solve the problem of time-consuming and labor-intensive, but also for the sustainable development made a great contribution.